I've seen wind turbines from a distance, and they looked big, but I had no idea how big they were until I was as the State Fair (Minnesota) last year, and saw a single blade, mounted vertically like an enormous sculpture, extending gracefully so high in the sky that passing comets and asteroids were getting stuck on it.
Then, just a few weeks later, I was driving from the cabin to Grand Rapids, MN, to give a talk, and came across a convoy of trucks holding wind turbine parts. Six or seven trucks, each carrying some huge part of a wind turbine installation, were pulled off to the side of the road taking up most of a small town (I think the drivers were getting coffee).
Page 3.14 has a post linking to Sb Germany with a couple of amazing videos of what happens when wind turbines break.
As Christian Reinboth reports on ScienceBlogs.de, at his energy blog Frischer Wind ("Brisk Wind"), unusually high winds in Denmark on Monday tore the rotor from a turbine on a wind-power farm in Hornslet. The turbine failed spectacularly, exploding mid-spin and scattering parts across the landscape below.
Here is one of the videos:
The other is here, at Frischer Wind, das blog zur Energiewende. Go have a look!
Technology
Comments
This windmill seems to be running too fast, like it was freewheeling unloaded. If there is no load and the brakes fail, it has its own system of stopping eventually. Catastrophically. For a more normal operation here is my video: http://www.youtube.com/watch?v=9Yrn50kTj6U
Posted by: Old Bogus | February 28, 2008 1:36 PM
It certainly is a good day for the ScienceBlogs Germany 'startup project' when we start to get links from one of the original 'ScienceBloggers' over here at ScienceBlogs.com (and one of the most productive in terms of postings, I might add).
So, thanks for noticing us :-)
Posted by: Christian | February 28, 2008 1:51 PM
Greg, am looking for information on a single blade wind turbine. Can't seem to find much information on them, and this blog entry came up number one on the search here at science blogs.
Specifically, I'm looking for information on a type of turbine that was apparently used for a Masters project in the last couple years at University of Rhode Island, which was used to power a boat. It's the TYPE of turbine, not the specific turbine itself that I'm interested in.
Information? Suggestions?
Thanks.
Kate (Dorid)
doridoidae@gmail.com
Posted by: Dorid | June 16, 2008 4:41 PM
I probably don't know, but you can look at this:
http://www.freepatentsonline.com/4517467.html
and contact this guy, who knows everything about wind energy:
http://www.christian-reinboth.de/
Posted by: Greg Laden | June 16, 2008 4:56 PM
The blades of 3Mw wind turbines are more than 50m. The tower is 120 meter height. In 20 years ago , this is impossible but today it has become the reality.
Posted by: windturbines | August 20, 2009 2:08 AM